OmniViz Solar connects to your Epever charge controller over Bluetooth and shows what your battery, panels and loads are doing, right now and day by day. Built for camper vans, motorhomes, boats and off-grid cabins.
Open it, see the battery and the sun at a glance. Dig deeper only when you want to.
Charge level, voltage, current in and out, and the time left before the battery is empty.
Watch the power go from the panels to the battery and your loads, with the charging stage of the controller.
Harvest and consumption for every day. Tap a day to see its solar and battery curves and its events.
Low battery, low voltage, high temperature, or panels not producing: you know before it becomes a problem.
Validated presets for LiFePO4, AGM, GEL and more. Every change is checked against Epever's rules, backed up first, and read back after.
Lay your phone on the panel: it tells you the best tilt and direction for today, or for the weeks ahead.
Switch the controller's load output on or off, or set it to follow the light or a timer.
Keep it simple with the essentials, or switch to Expert mode for every voltage threshold and timer.
Other Epever models (Tracer AN, Triron…) use the same protocol and should work. Tell us which one you have when you sign up.
Your controller only sees what goes through it. A small sensor on your inverter's battery cable measures the rest, so the app shows your true consumption and an exact time until empty. It records on its own, day and night.
We're testing on Android and iPhone. Join the test, use the app with your controller or in demo mode, and tell us what you think.
Become a tester
OmniViz